A sharper eye for a safer world.

Security Panel

SECURITY ALARM PANEL ANG2S09DW

  • Micro-controller based.
  • LCD display remote keypad.
  • 3 status Leds – armed, power and dialling.
  • 16 key back lit key pad.
  • Sleek white abs body with key pad cover.
  • Separate main control station for connection Terminals and power supply unit.
  • Two access codes – master and servant.
  • Part arm facility.
  • Automatic arming facility.
  • Automatic disarming facility.
  • Can be operated through cellular mobile or Telephone line using DTMF instrument.
  • Number of rings after which panel responds is programmable.
  • Panel can be armed and disarmed through Telephone.
  • Code can be changed through telephone.
  • Alarm trigger check through telephone.
  • Any 4 electrical devices can be switched on or off through telephone.
  • These electrical devices can also be switched on or off through remote key pad.
  • Armed LED / light output.
  • Built in battery backup provision.
  • Zone omitting facility.
  • Individual zone status is indicated on display.
  • Individual entry delay time 2 to 255 seconds.
  • Individual exit delay time 2 to 255 seconds.
  • Sounder time 2 to 20 minutes.
  • Silent arming.
  • Night mode arming.
  • Intrusion log.
  • Dedicated panic, fire and quick arm keys.
  • Power failure indication.
  • Blown fuse indication on LCD display.
  • Non-volatile memory.
  • Open zone indication on LCD display.
  • Automatic re-arming after an intrusion.
  • Only three incorrect code attempts allowed to Disarm the system after which the system goes into alarm state.
  • Musical audio indication.
  • Multiple sounder outputs.
  • Armed light relay output.
  • In-built tamper switch.
  • Main control station housed in elegant white ABS Body.

Technical Specifications:

ELECTRICAL 
REMOTE KEY PAD ONLY 
Quiescent current25 mA.
Quiescent current with backlit LCD45 mA.
MAIN CONTROL STATION WITH ONE REMOTE KEY PAD60 mA.
Quiescent current with backlit LCD85 mA.
Current with dialling140 mA.
Maximum sounder 1 current output1A.
Maximum sounder 2 current output1A.
Sounder saturation Voltage< 1V at 1A.
Remote keypadsUp to six.
Non-volatile MemoryProgramming and Log.
Zone response time<500ms.
Zone Loop Resistance<5k ohm for NORMALLY CLOSED.
Load switch outputCan take 12V relay to control any mains load.
POWER SUPPLY 
Mains supply Voltage220+10%-15% 50Hz.
Total current Output800mA at 220V AC (Fuse JA 20mm On Main Card).
Regulation<9%.
Ripple<220mV RMS.
Battery Voltage12V DC.
Battery typeSMF Rechargeable.
Battery Recharge Voltage13.8V +/-0.2V DC.
Fuse250ma 20mm AC Mains on PS Card.
ENVIRONMENTAL 
Operating Temperature0°C to 45°C.
Storage Temperature-20°C to 60°C.
Maximum humidity95% non-condensing.
Environment residential / commercial / light Industrial.
PHYSICAL 
REMOTE KEY PAD. 
Dimensions148mm x 130mm x 33mm.
MAIN CONTROL STATION 
Dimensions236mm x 226mm x 80mm.
Max Battery Dimensions150mm x 110mm x 64mm.